 |
Water Meters are used to measure the
amount of make-up water added to a system. The Water Meter can be fitted
with a dial readout or a contact head. The contact head will give a dry
contact closure every predetermined number of gallons to signal a remote
counter or timer. The timer can, in turn, be used to run a pump, solenoid,
or other device. The make-up water can be treated based on
volume through the Water Meter. The timer can be part of a remote pump
control panel or is available as a Water Meter/Timer package. The timer in
the Water Meter/Timer package is an Omron timer and is infinitely adjustable
from seconds to hours. The timer contacts are rated at 10 amps, 1/4 HP, 120 VAC and are wired to a receptacle on the bottom of the timer enclosure.
|
